Cement foam insulation board mechanical equipment is the latest IDT developed a new type of fire protection energy-saving insulation materials, from cement, fly ash and other cementitious materials and modifiers, foaming agents, etc. made in the factory low thermal conductivity , temperature, weather, aging, non-combustible modified foam concrete (foam concrete) insulation board. Cement foam insulation board equipment. One. Performance advantages 
 1, green 
 Non-irritating and harmful gas emissions 
 High fire resistance 
 Diverse inorganic materials are A1 class fire foam material, has good fire resistance, refractoriness to above 1000 ℃, fully meet the fire separation with a fire-resistant requirements. 
 2, high insulation 
 Closed-cell foam material as diverse inorganic rate of> 95%, reduce the high rate of convective heat obturator is a prerequisite for high heat. Therefore, the Division Prudential building fire buffer zone development and production of thermal conductivity can reach 0.045W / m? K, and thermal conductivity of polystyrene board is roughly equal, to meet the demand for building insulation. 
 3, the relative strength of a good, easy to fragmentation 
 Development and production of fire separation with a compressive strength, flexural strength indicators were higher, reaching a relatively uniform low-density high strength, easy to use and transport fragmentation, and fire-resistant integrity. 
 4, light 
 Light is another advantage of our products. When the density can be achieved in 100-300kg/m3 the target with fire separation requirements. At the same time can greatly reduce costs. 
 5, non-toxic harmless 
 Multi-wall insulation foam fire buffer zone of inorganic raw materials will not burn at high temperatures and does not release toxic gases, are safe, environmentally friendly building materials. 
 6, long life 
 External wall insulation foam fire barrier with multiple inorganic life of more than 50 years, and the life of the building to keep pace. 
 7, good water resistance 
 As the multi-foam materials are inorganic silicate material, so water resistance is excellent. 
 8, the interface is good 
 Since the material is porous material and with the mortar, the wall is homogeneous, so the interface is very good, the construction process, unlike those of organic cotton insulation or as needed anchor, you can directly paste. 
 9, energy security 
 Installation process does not produce harmful emissions and waste, and no inorganic cotton like floating debris that can pollute the environment. 
 Performance indicators 
 Internal structure of the density (kg/m3) Thermal conductivity 
 (W / m? K) shrinkage values 
 (Mm / m) frost resistance 
 (Freezing quality loss ≤) Water absorption 
 Compressive strength 
 (MPa) 
 Closed pores 1mm ~ 100 ~ 300 0.045 0.07 0.37 0.70 5% <15 0.10 1.50 

 Two. Use 
 1 exterior wall exterior insulation and external wall insulation 
 (2) Fire Barrier wall insulation 
 3 roof insulation 
 4 other insulation